No doubt, a car needs engine oil for lubrication so you can accelerate. Transmission fluid is necessary to automate the gear shifts. However, if your vehicle has a hydraulic brake system, you may also require brake fluid.

The brake fluid has the responsibility to generate enough pressure so that brake pads can work properly and the vehicle can get stopped as expected. When you step on the brake pedal, pressure from the brake fluid is generated to press the brake pads, which in turn stop your wheels from turning.

So brake fluid is an important component, and if it goes low, you cannot stop the vehicle properly. Your car might behave out of control just because of the scarcity of brake fluid. However, it is necessary to understand the reason behind the low level of brake fluid.

Why does brake fluid go low?

Imagining a vehicle without brakes is impossible. However, brakes can fail at any time. If the brakes cause any problem or begin to behave strangely. You just need to be attentive for brakes. Here, we are sharing some essential points to understand why brake fluid goes bad.

A leakage inside the unit is a cause for concern

As a brake system or unit consists of a number of components, there might be a leak anywhere, including in the master cylinder, brake lines, hoses, or callipers. When a brake system leaks, there is a lack of brake fluid, and the brakes do not work as efficiently as they should.

However, leaks can be the result of damage that has happened while driving. It could be a collision with a curb or a road stone. Leaks are easily identified by the spots left under the vehicle. You can also confirm it by checking the fluid reservoir around the engine.

Besides, just come to Service My Car for an expert assessment.

Worn-out brake pads waste more brake fluid

In hydraulic braking systems, the brake pads can also cause damage. It occurs when the calliper piston must descend from the resting towards the brake pads.

In case you are living in Dubai and you are looking for a trusted car garage for a brake pad replacement, we would like to suggest you Service My Car, the best and trusted car workshop in Dubai.

As brake fluid has to travel farther than normal, there is more work to do, and the loss of fluid is higher.

Damaged brake lines may leak fluid

Especially in older vehicles, there could be a lot of wear and tear. But some components are prone to damage when they get rusted. These damaged brake lines can leak brake fluid, eventually hampering the braking capacity of a car.

Though there are reasons behind a brake fluid loss, but when do you really get to know about the problem due to brake fluid? Here, we are sharing these points that will really help identify the problems with brakes.

An indication from the brake warning light

Sensors are an integral part of most vehicles. The braking system does not take too much time to generate indications once the sensor senses any problem. When the brake fluid level is low, the brake light usually begins to illuminate.

Usually, the brake system consists of sealing protection, and the fluid level should be close to full. Though fluid loss is inevitable, if there is too much of it, you should consider it at the earliest possible time.

Get your vehicle to Service My Car as soon as possible for a proper inspection.

Dirty fluid is not a good sign for your car

Brake fluid discoloration is not a good thing. If you find your brake fluid in a dark color, such as brown or black, this indicates that it is dirty.

Besides, there could be a considerable number of particles floating in the fluid.

Get the brake fluid changed if you find any contamination.

Brakes give you a tough experience

Your brakes should be smooth enough to deliver the required performance without bothering you. However, any hassle, such as a spongy brake experience, is not good for you in any case.

Though it is a result of moisture build-up inside the brake system, when the moisture becomes boiled, problems arise. Due to heat, when moisture turns into the air in the brake lines, it would be hard to compress it, and the brake efficacy would suffer. You can also go to Service My Car for brake pads replacement.

You need a fresh set of brakes

If you recently chose the flush, there is no point in using the brake fluid because you cannot use the engine oil again. However, brakes that are beyond repair are unable to stop a car at all.

If you use new oil, you can protect yourself, other drivers, and the environment by ensuring that your brakes function as effectively as possible. Think about choosing Service My car replaced your brakes.

If you notice any brake problems, an underlying issue such as a lack of brake fluid or worn-out brake pads may be present. However, since it is very difficult to diagnose while driving, you should pull over to the side of the road before calling for roadside assistance.

If the brakes aren't working properly, don't try to drive the car. Do not jeopardise the security of others or yourself. Service My Car is always ready to serve you for any car maintenance while you can book a car service or order a car repair order on our website or app online.

Car Won’t Start Because of a Dead Battery? Here’s How to Jump Start Your Car

On one normal morning, you rush to your vehicle with those quick steps while battling against the clock. But, eventually, once you turn your car keys, just the sound of a dreaded click appears under the hood.

Of course! You have a dead car battery. You can deal with such a situation as Jump Start is here to get your car back on the road.

However, jump starting is a valuable utility to bail you out of an odd situation. But, it requires some knowledge to implement things properly to get the proper result.

What does it mean by jump start your car?

Jump starting is the process of starting a car's engine using an external battery, typically from another vehicle.

It is possible, though, if you have been hearing noises when you turn the key in your car. This is a method to increase the low current in your car's battery to crank up your car’s engine.

Although starting a car with a dead battery is a straightforward process, there are some safety precautions that must always be taken. Also keep in mind that the electrical system needs to be checked if your car's battery runs out frequently.

However, you might try these things to deal with it.

Working Jumper Cables- The word "working" signifies that jumper cables should be rust free and have proper crocodile clips on both ends.

Car with a working battery- Unless your car has special voltage requirements, most vehicles come with a 12.6 V battery. The owner's manuals, however, contain information on the ideal battery voltage. Before choosing a jump start, it would be reasonable to take a look.

If your batteries are different voltages, it could cause charging issues and reduce battery life for you or the other vehicle.

Additional accessories- You need rubber gloves and safety goggles. Moreover, there is a need for rags, paper towels, to clean battery terminals.

Once you assemble all the necessities, these steps take you through the process of jump starting seamlessly.

Bring the car with a charged battery closer to the car with a dead battery.

However, jump start cables possess enough length, but they still have a limit. Make the distance between both cars short enough so that you can easily utilize the jump start cable by connecting them properly.

Make jump start cable connection properly.

You are required to do some things in order to make a proper connection with jump start cables.

• First, remove the keys from both cars.
• Open the hood to determine the location of the batteries.
• Once located, try to identify the terminals of the batteries.
• A positive sign, engraved over the top of the terminal, identifies the positive terminal.
• A negative sign, engraved over the top of the terminal, identifies the negative terminal.
• Now, take the cable and untangle it so that the ends do not come closer to each other.
• Connect the red clamp on one end of the jumper cables to the top of the positive terminal of the dead car battery. Place the matching black clamp on the negative side.
• Next, go to the other end of the jump start cable to connect it to the charged battery terminals. Connect the red clamp to the positive and the black one to the negative terminal respectively.

Jump start your car

Now, you need to take the necessary step of jump starting. However, this requires you take care certain things.

• Check that the car's electronics are turned off and that nothing is connected to the 12 V port.
• After connecting the cables, start the vehicle with the charged battery and let it run for a few minutes.
• Return to the car with the dead battery and turn the key until the engine starts completely. This may take some time as the dead battery draws energy from the other vehicle. If the car starts, you have to remove the jump start cable. This also requires you to follow certain steps.
• Let both the cars in running state while you can start with the car with a dead battery to remove the black clamp cautiously and put it aside on the ground carefully away from the car. Then, remove the red clamp too.
• Next, you need to follow the same steps with the car with a charged battery.
• As all clamps are disconnected, next roll up the jumper cables and put them safe.

In case you find the process a bit technical, you can avail the service of Service My Car to jump start your car.

However, jump start is a remedy to dead battery for once in a while. If you are dealing with dead battery every now and then, your car might need a car battery replacement soon.

Searching the best car service and wondering ‘where is the best car repair near me?’ Service My Car is the best solution for you. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best car service center.

If you wish to be sure about your car battery condition, head towards the Service My Car. Our experts do not only assist you in assessing your car’s battery, but you also get a professional opinion for battery replacement.

You can visit our website to book a car service or request a car repair quote.

What Are You Experiencing Engine Seized Or Locked Up? – Explained!

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Our highly trained and experienced technicians will carry out a 24-point car inspection dubai give you a comprehensive health report. All the major parts, such as the engine, the AC, the suspension and more.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

What Are You Experiencing Engine Seized Or Locked Up? – Explained!

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

If you need any type of audi service or repair, Service My Car provides you free pickup and delivery at the nearest ​audi service dubai.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

What Are You Experiencing Engine Seized Or Locked Up? – Explained!

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

Looking for the best gmc repair and servicing? Look no further than Service My Car. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best gmc repair dubai.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

If you need any type of Audi service or repair, Service My Car provides you free pickup and delivery at the nearest audi repair dubai center.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

What Are You Experiencing Engine Seized Or Locked Up? – Explained!

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

Searching for the best rolls royce service and wondering ‘where is the best rolls royce specialist near me?’ Service My Car is the best solution for you. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best rolls royce service center.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

What Are You Experiencing Engine Seized Or Locked Up? – Explained!

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

If you need any type of Honda service or repair, Service My Car provides you free pickup and delivery at the nearest ​honda garage dubai.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

Have you ever experienced that your car’s engine refused to respond all of a sudden? If yes, you might be aware of the cause of the problem.

On one hand, an engine halts when it gets seizes, which usually happens. Otherwise, it may be locked up. However, there are a whole lot of different reasons for an engine seizure or lockup. A locked up engine and complete seizure do not allow a vehicle to move. But, you should understand what distinguishes them actually.

What differentiates a seized engine from a locked engine?

They are quite similar. However, when the engine does not move due to mechanical failure, it is seized. While there are other reasons, such as the entry of water into the combustion chamber, the engine usually gets into a locked up state.

Both require some sort of remediation, but before moving forward, you should update yourself. You need to be aware of what initially caused your engine to seize. Usually, seizing occurs due to a lack of oil, poor circulation, or infrequent use. Vapour locks and hydro locks are additional options to think about.

Let’s get through these points to better understand the causes of concern for an engine seizure or lockup.

Is it Engine Seizure?

Engine goes through the lack of proper lubrication for a prolonged period.

The piston in the cylinder typically moves up and down. Given that both objects are made of metal, friction is possible, especially in the absence of lubrication. The pistons can move without becoming too hot because the engine oil creates a thin layer between the cylinder walls and the pistons.

For whatever reason, the lack of a layer allows metals to clash with one another. This causes a higher level of friction and heat, which can eventually cause the combustion chamber's components to melt.

There may be instances where several components fuse, especially the pistons that can fling out of the chamber.

Despite the cause, an engine seize is the worst of all incidents that can happen to a vehicle. This can force you to pay a hefty car engine repair bill. However, you can mitigate such a risk by being conscious of your car's lubrication needs.

If you are noticing some sort of engine issue, just get your vehicle to Service My Car immediately for further damage.

Engine oil does not circulate properly.

A scarcity of engine oil is a major threat to a car’s engine. But its circulation also might be a cause for concern.

There might be an issue with the engine oil circulation to the critical points. Major problems for the circulation of engine oil arise when the pump does not work properly and oil cannot circulate properly.

Another major concern is leakage due to a worn seal or damaged hose. If these end up failing, then your engine may seize. It could be a clogged oil filter that is not passing enough engine oil.

However, any issue that leads to an engine seizure is not good. However, it is possible to deal with a seized engine. Service My Car provides a qualified mechanic to you to make your vehicle run again.

However, it is always wise to mitigate risks by opting for car scanning and diagnostics, especially when you sense some sort of problem such as frequent engine overheating or engine oil pump indication. You just need car engine oil, an oil filter replacement, or even an oil pump to avoid any engine seizures.

Car has been stranding without use.

Similar to how your body feels stiff after spending a long time doing nothing. This is also possible with a car engine if it has been sitting idle for too long, leaving it vulnerable to rust or corrosion. The piston rings may become stuck in position when rust develops inside the cylinders.

Your engine may have locked up if the battery is working properly, you can turn the ignition, but nothing happens.

Is the engine locked up?

Your car’s engine is hydro locked.

Since engine combustion chamber works on mixture of air and fuel only. They could all suddenly stop moving if there is too much water present, a condition known as hydro lock. How quickly you were moving when it happened has a big impact on the amount of damage that follows.

Sometimes, hydro locked keep the cylinders and other parts safe from being damaged, however they can easily be fixed. However, it mostly depends on the engine RPMs. At high RPMs, an engine is a candidate of severe damage while it may receive some sort of grant at low RPMs.

Your car’s engine is vapour locked.

The engine in your car could be experiencing vapour lock, similar to hydro lock. Vapour lock happens when the liquid inside the fuel system gets too hot and turns into a gas that your engine wasn't designed to handle.

If the engine in your car becomes vapour locked, it may sputter before losing power. Similar to hydro locks, vapour locks also hurt the engine.

Searching for the best cadillac service and wondering 'where is the best cadillac specialist near me?' Service My Car is the best solution for you. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best cadillac service center.

Whether it is engine seizure or lock up, both may initiate severe damages. However, you might needs experts help to revive your car’s engine. Service My Car offers you expert services for a complex repair such as engine seizure or lock up. You just need to book a car service or order a car repair quote on our website or app anytime.

The Essential Car Tune-up Checklist

A vehicle’s needs vary, as each one of them equips with distinctive technology. However, a car needs to be serviced once a year, or after travelling 10,000 or 12,000 KM without the required tune-up.

The distinction between a tune-up and a car service is hazy, though. But if you put the consideration of the vehicle in perspective, you can understand it. A tune-up, to put it simply, entails some additional and crucial services for a vehicle.

However, a tune-up works as immunity booster to a vehicle when you expect a vehicle performing at its peak for a long time.

Whether your car is an older or newer model, frequent tune-ups can help keep it running in peak condition!

Here are some signs a vehicle may need visit a workshop for a tune-up.

If the engine starts to hesitates after turning the keys.

An engine that hesitates is something, neither you nor your car wants to experience, but it could indicate a serious problem under the hood.

The most obvious cause of this issue is worn spark plugs. Your car won't start properly because these sparks can no longer provide the spark.

Additionally, there might be a battery problem because a weak battery cannot produce the ignition's necessary spark. You can speak with a mechanic to determine the true source of this issue.

However, if you are proactive about your tune-up schedule, you can avoid these problems. A mere spark plugs replacement does not cost too much money or time. Regular tune-ups are crucial because they can detect these problems early on, saving you from having to make expensive repairs.

Avail a proper tune-up of your vehicle by a professional at Service My Car.

Dropping braking responsiveness

Since effective braking is just as crucial to a vehicle as healthy acceleration. Dealing with non-responsive brakes while driving is useless.

They ought to be nimble, practical, and of course efficient when driving. Given that all brakes gradually deteriorate on own, you might not know when you will need that extra braking power.

A vehicle's brake system needs to be tuned up critically. The ability of brake pads to provide you with reliable braking diminishes over time. If your car spends the majority of its time in traffic, you might experience premature brake irresponsibility.

Therefore, you should get a tune-up before putting both yourself and your car in danger.

Inefficient Fuel consumption

Nevertheless, a vehicle's fuel usage changes over the course of its life.The performance of your engine, the efficiency of your emissions system, and most importantly your driving habits are all important considerations when calculating the fuel economy of your car.

However, if specifics are not displayed on your car's dashboard, it is more difficult to detect even small changes in fuel consumption. Nowadays, the majority of cars come equipped with an MPG monitor that shows the average fuel efficiency of a car.

Furthermore, incorrect car wheel alignment can significantly reduce your car's fuel efficiency.

Inefficient fuel economy is another sign that something else is wrong with the engine. By getting a tune-up according to the schedule outlined above, you can stop further damage from occurring.

Warning Lights at dashboard

If you cannot observe the technicalities of an automobile, there is something easy on the dashboard to understand. These are warning lights that comes handy when there is any tune-up pending.

If any warning light turns on, there is something wrong or a maintenance pending under the hood.

However, most people might not aware of intimation of warning lights and often have to pay to big bills for the substantial damages that can be easilyavoided.

Just head towards Service My Car for an expert’s opinion when you notice a warning light at dashboard and cannot conclude. You won’t like to pay for a car engine repair when you can mitigate the damage with a cheap fix.

Appearance of unusual noises

Not all noises are bad, but some of them could indicate that your car is acting strangely.However, if you hear a noise while driving, the situation might be serious.

While your car may make grinding noises when there is a lack of fluid, the noises like pounding appear when there is a loose part.

To keep everything moving and functioning properly, there are many moving parts. If your car isn't serviced, any of these broken or loose parts may result in noises, which will grow louder and worse.

Therefore, it is in your hand to keep things in control by visiting a reliable service centre for a timely tune-up.

Since a car parts degrades over-time, they need to be replaced on time. If you do act smartly, a car may force you to take an action sooner or later and spending more money than you anticipate.

Bring your vehicle to Service My Car for a tune-up as soon as possible. Moreover, opt for a car scanning and diagnostics to figure out all existing and potential problems with your vehicle.

If you’re looking for the best car window tinting or 3M car tinting services, there is no better option than Service My Car. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best ​car tinting dubai. Besides, you can ask for quote of a car service on our website and app too.

You can take an appointment for a car service or order a car repair quote at our website or app anytime.

A vehicle’s needs vary, as each one of them equips with distinctive technology. However, a car needs to be serviced once a year, or after travelling 10,000 or 12,000 KM without the required tune-up.

The distinction between a tune-up and a car service is hazy, though. But if you put the consideration of the vehicle in perspective, you can understand it. A tune-up, to put it simply, entails some additional and crucial services for a vehicle.

However, a tune-up works as immunity booster to a vehicle when you expect a vehicle performing at its peak for a long time.

Whether your car is an older or newer model, frequent tune-ups can help keep it running in peak condition!

Here are some signs a vehicle may need visit a workshop for a tune-up.

If the engine starts to hesitatesafter turning the keys.

An engine that hesitates is something, neither you nor your car wants to experience, but it could indicate a serious problem under the hood.

The most obvious cause of this issue is worn spark plugs. Your car won't start properly because these sparks can no longer provide the spark.

Additionally, there might be a battery problem because a weak battery cannot produce the ignition's necessary spark. You can speak with a mechanic to determine the true source of this issue.

However, if you are proactive about your tune-up schedule, you can avoid these problems. A mere spark plugs replacement does not cost too much money or time. Regular tune-ups are crucial because they can detect these problems early on, saving you from having to make expensive repairs.

Avail a proper tune-up of your vehicle by a professional at Service My Car.

Dropping braking responsiveness

Since effective braking is just as crucial to a vehicle as healthy acceleration. Dealing with non-responsive brakes while driving is useless.

They ought to be nimble, practical, and of course efficient when driving. Given that all brakes gradually deteriorate on own, you might not know when you will need that extra braking power.

A vehicle's brake system needs to be tuned up critically. The ability of brake pads to provide you with reliable braking diminishes over time. If your car spends the majority of its time in traffic, you might experience premature brake irresponsibility.

Therefore, you should get a tune-up before putting both yourself and your car in danger.

Inefficient Fuel consumption

Nevertheless, a vehicle's fuel usage changes over the course of its life.The performance of your engine, the efficiency of your emissions system, and most importantly your driving habits are all important considerations when calculating the fuel economy of your car.

However, if specifics are not displayed on your car's dashboard, it is more difficult to detect even small changes in fuel consumption. Nowadays, the majority of cars come equipped with an MPG monitor that shows the average fuel efficiency of a car.

Furthermore, incorrect car wheel alignment can significantly reduce your car's fuel efficiency.

Inefficient fuel economy is another sign that something else is wrong with the engine. By getting a tune-up according to the schedule outlined above, you can stop further damage from occurring.

Warning Lights at dashboard

If you cannot observe the technicalities of an automobile, there is something easy on the dashboard to understand. These are warning lights that comes handy when there is any tune-up pending.

If any warning light turns on, there is something wrong or a maintenance pending under the hood.

However, most people might not aware of intimation of warning lights and often have to pay to big bills for the substantial damages that can be easilyavoided.

Just head towards Service My Car for an expert’s opinion when you notice a warning light at dashboard and cannot conclude. You won’t like to pay for a car engine repair when you can mitigate the damage with a cheap fix.

Appearance of unusual noises

Not all noises are bad, but some of them could indicate that your car is acting strangely.However, if you hear a noise while driving, the situation might be serious.

While your car may make grinding noises when there is a lack of fluid, the noises like pounding appear when there is a loose part.

To keep everything moving and functioning properly, there are many moving parts. If your car isn't serviced, any of these broken or loose parts may result in noises, which will grow louder and worse.

Therefore, it is in your hand to keep things in control by visiting a reliable service centre for a timely tune-up.

Since a car parts degrades over-time, they need to be replaced on time. If you do act smartly, a car may force you to take an action sooner or later and spending more money than you anticipate.

Bring your vehicle to Service My Car for a tune-up as soon as possible. Moreover, opt for a car scanning and diagnostics to figure out all existing and potential problems with your vehicle.

Searching the best workshop and wondering ‘where is the best car battery replacement near me?’Service My Car is the best solution for you. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best car workshop.

You can take an appointment for a car service or order a car repairquote at our websiteor app anytime.

Here’s Your Guide to Learn about What Makes a Cooling System Goes Bad

A car is nothing without an engine, and an engine is nothing without a cooling system. An automobile cooling system always proves to be one of the most important features on a vehicle.

How does a heat generating machine survive if there is no cooling available? A complex mechanism of the cooling system makes it possible. However, such a system consists of a number of parts and there is a probability of wear and tear of these parts.

Before moving further, let’s take a look at the cooling system and its functionality under the hood.

What makes a cooling system so important?

Most important part of a cooling system is radiator as it dissipates heat from coolant. A pump circulates the coolant through the engine, hoses, and other parts of the system.

However, cooling system consists of fans to ensure sufficient airflow for radiator cooling, a thermostat valve to manage the temperature of the engine.

As an engine converts fuel into the kinetic energy, it usually releases the heat while making environment hot under the hood. However, cooling system has coolant to absorb heat when it circulates around the engine.

But, once coolant has finished its job, now it is time to radiator to do its job dissipating heat from coolant and blowing it out with the help of fans. However, Thermostat valve has an important role to play here too.

It proves to be useful in some condition when there is no need of cooling. Remember those cold mornings when engine needs some heat to warm up initially, at these times, thermostat closes to disconnect the radiator from engine so that it may get heated up enough.

The engine would always lose heat to the radiator and take longer to warm up without a thermostat. The thermostat modifies flow to the radiator once the engine reaches the desired operating temperature to keep the temperature steady.

The cooling system also includes elements of the ventilation system because engine heat is used to warm the interior of the car.

As discussed above, these parts are essential for any automobile, but they also prone to wear and tear. Here, you get to learn about some parts of cooling system that might let you in trouble at some point of time.

Radiator fails prematurely

Without a radiator, cooling system cannot work. However, it has the tendency to last for lifespan of vehicle. But, negligence might let you in trouble and encounter with a failed radiator.

Major reason of a radiator failure is introduction of aluminium wires with plastic headers. They are the replacement of more durable copper wire. However, former may bring some cost cutting, but they lacks in durability.

As you have been introduced with the importance of radiator, it is not something to take for granted as a mere negligence will end up costing you a fortune for a car engine repair. However, if you find something usual or temperature of your vehicle rise unexpectedly, just bring your vehicle at Service My Car at the earliest.

Thermostat does not work properly

Thermostat works as a manager to a car’s cooling system. If it fails to manage the flow of coolant, adverse incidents can happen.

This tiny valve has a temperature-dependent open and close function. Your car may have trouble getting to the right operating temperature during the winter if the thermostat malfunctions while it is open. On the other hand, overheating can result from a thermostat that malfunctions when it is closed.

However, thermostat is not quite an expensive piece of cooling system component, but its failure might produce bad results.

Just head towards Service My Car, if you notice a check engine light on and your car’s engine does resist to the heat.

Pump fails to circulate the coolant properly

As coolant or antifreeze needs a proper circulation around the engine, it could be water pump failure that might hamper the circulation and eventually engine ends up heated.

However, a water pump failure might happen anytime while it could be more drastic if occurs on a road. You have to ask for a roadside assistance or a car recovery to get your vehicle to a service station. Service My Car is available for your service anytime; however, you have to intimate.

Hoses might worn out over time

Although radiator hoses are sturdy parts, they are susceptible to deterioration. Hoses frequently begin to break from the inside while still appearing intact from the outside. If the hose already appears swollen, it is unquestionably past its prime. The replacement of the radiator hoses is a crucial part of maintaining the vehicle's cooling system. The last thing you want while driving is for a hose to suddenly burst.

However, it is recommended to get the radiator hoses inspected once in six months at Service My Car.

The abovementioned cooling components needs to be intact if you expect your vehicle providing you the luxury of riding. Besides, you also inspect the antifreeze level as it might reduce overtime or get degraded.

If you need any type of land rover service or repair, Service My Car provides you free pickup and delivery plus full car servicing at the nearest land rover repair dubai center.

Service My Car helps you in keeping your vehicle up to the mark while offering car maintenance service at very affordable price. Just book a car service or order a car repair quote on our app or website anytime.

A car is nothing without an engine, and an engine is nothing without a cooling system. An automobile cooling system always proves to be one of the most important features on a vehicle.

How does a heat generating machine survive if there is no cooling available? A complex mechanism of the cooling system makes it possible. However, such a system consists of a number of parts and there is a probability of wear and tear of these parts.

Before moving further, let’s take a look at the cooling system and its functionality under the hood.

What makes a cooling system so important?

Most important part of a cooling system is radiator as it dissipates heat from coolant. A pump circulates the coolant through the engine, hoses, and other parts of the system.

However, cooling system consists of fans to ensure sufficient airflow for radiator cooling, a thermostat valve to manage the temperature of the engine.

As an engine converts fuel into the kinetic energy, it usually releases the heat while making environment hot under the hood. However, cooling system has coolant to absorb heat when it circulates around the engine.

But, once coolant has finished its job, now it is time to radiator to do its job dissipating heat from coolant and blowing it out with the help of fans. However, Thermostat valve has an important role to play here too.

It proves to be useful in some condition when there is no need of cooling. Remember those cold mornings when engine needs some heat to warm up initially, at these times, thermostat closes to disconnect the radiator from engine so that it may get heated up enough.

The engine would always lose heat to the radiator and take longer to warm up without a thermostat. The thermostat modifies flow to the radiator once the engine reaches the desired operating temperature to keep the temperature steady.

The cooling system also includes elements of the ventilation system because engine heat is used to warm the interior of the car.

As discussed above, these parts are essential for any automobile, but they also prone to wear and tear. Here, you get to learn about some parts of cooling system that might let you in trouble at some point of time.

Radiator fails prematurely

Without a radiator, cooling system cannot work. However, it has the tendency to last for lifespan of vehicle. But, negligence might let you in trouble and encounter with a failed radiator.

Major reason of a radiator failure is introduction of aluminium wires with plastic headers. They are the replacement of more durable copper wire. However, former may bring some cost cutting, but they lacks in durability.

As you have been introduced with the importance of radiator, it is not something to take for granted as a mere negligence will end up costing you a fortune for a car engine repair. However, if you find something usual or temperature of your vehicle rise unexpectedly, just bring your vehicle at Service My Car at the earliest.

Thermostat does not work properly

Thermostat works as a manager to a car’s cooling system. If it fails to manage the flow of coolant, adverse incidents can happen.

This tiny valve has a temperature-dependent open and close function. Your car may have trouble getting to the right operating temperature during the winter if the thermostat malfunctions while it is open. On the other hand, overheating can result from a thermostat that malfunctions when it is closed.

However, thermostat is not quite an expensive piece of cooling system component, but its failure might produce bad results.

Just head towards Service My Car, if you notice a check engine light on and your car’s engine does resist to the heat.

Pump fails to circulate the coolant properly

As coolant or antifreeze needs a proper circulation around the engine, it could be water pump failure that might hamper the circulation and eventually engine ends up heated.

However, a water pump failure might happen anytime while it could be more drastic if occurs on a road. You have to ask for a roadside assistance or a car recovery to get your vehicle to a service station. Service My Car is available for your service anytime; however, you have to intimate.

Hoses might worn out over time

Although radiator hoses are sturdy parts, they are susceptible to deterioration. Hoses frequently begin to break from the inside while still appearing intact from the outside. If the hose already appears swollen, it is unquestionably past its prime. The replacement of the radiator hoses is a crucial part of maintaining the vehicle's cooling system. The last thing you want while driving is for a hose to suddenly burst.

However, it is recommended to get the radiator hoses inspected once in six months at Service My Car.

The abovementioned cooling components needs to be intact if you expect your vehicle providing you the luxury of riding. Besides, you also inspect the antifreeze level as it might reduce overtime or get degraded.

If you need any type of Honda service or repair, Service My Car provides you free pickup and delivery plus full car servicing at the nearest honda garage dubai service centre.

Service My Car helps you in keeping your vehicle up to the mark while offering car maintenance service at very affordable price. Just book a car service or order a car repair quote on our app or website anytime.

Car Won’t Start Because of a Dead Battery? Here’s How to Jump Start Your Car

On one normal morning, you rush to your vehicle with those quick steps while battling against the clock. But, eventually, once you turn your car keys, just the sound of a dreaded click appears under the hood.

Of course! You have a dead car battery. You can deal with such a situation as Jump Start is here to get your car back on the road.

However, jump starting is a valuable utility to bail you out of an odd situation. But, it requires some knowledge to implement things properly to get the proper result.

What does it mean by jump start your car?

Jump starting is the process of starting a car's engine using an external battery, typically from another vehicle.

It is possible, though, if you have been hearing noises when you turn the key in your car. This is a method to increase the low current in your car's battery to crank up your car’s engine.

Although starting a car with a dead battery is a straightforward process, there are some safety precautions that must always be taken. Also keep in mind that the electrical system needs to be checked if your car's battery runs out frequently.

However, you might try these things to deal with it.

Working Jumper Cables- The word "working" signifies that jumper cables should be rust free and have proper crocodile clips on both ends.

Car with a working battery- Unless your car has special voltage requirements, most vehicles come with a 12.6 V battery. The owner's manuals, however, contain information on the ideal battery voltage. Before choosing a jump start, it would be reasonable to take a look.

If your batteries are different voltages, it could cause charging issues and reduce battery life for you or the other vehicle.

Additional accessories- You need rubber gloves and safety goggles. Moreover, there is a need for rags, paper towels, to clean battery terminals.

Once you assemble all the necessities, these steps take you through the process of jump starting seamlessly.

Bring the car with a charged battery closer to the car with a dead battery.

However, jump start cables possess enough length, but they still have a limit. Make the distance between both cars short enough so that you can easily utilize the jump start cable by connecting them properly.

Make jump start cable connection properly.

You are required to do some things in order to make a proper connection with jump start cables.

• First, remove the keys from both cars.
• Open the hood to determine the location of the batteries.
• Once located, try to identify the terminals of the batteries.
• A positive sign, engraved over the top of the terminal, identifies the positive terminal.
• A negative sign, engraved over the top of the terminal, identifies the negative terminal.
• Now, take the cable and untangle it so that the ends do not come closer to each other.
• Connect the red clamp on one end of the jumper cables to the top of the positive terminal of the dead car battery. Place the matching black clamp on the negative side.
• Next, go to the other end of the jump start cable to connect it to the charged battery terminals. Connect the red clamp to the positive and the black one to the negative terminal respectively.

Jump start your car

Now, you need to take the necessary step of jump starting. However, this requires you take care certain things.

• Check that the car's electronics are turned off and that nothing is connected to the 12 V port.
• After connecting the cables, start the vehicle with the charged battery and let it run for a few minutes.
• Return to the car with the dead battery and turn the key until the engine starts completely. This may take some time as the dead battery draws energy from the other vehicle. If the car starts, you have to remove the jump start cable. This also requires you to follow certain steps.
• Let both the cars in running state while you can start with the car with a dead battery to remove the black clamp cautiously and put it aside on the ground carefully away from the car. Then, remove the red clamp too.
• Next, you need to follow the same steps with the car with a charged battery.
• As all clamps are disconnected, next roll up the jumper cables and put them safe.

In case you find the process a bit technical, you can avail the service of Service My Car to jump start your car.

However, jump start is a remedy to dead battery for once in a while. If you are dealing with dead battery every now and then, your car might need a car battery replacement soon.

Looking for the best Maserati repair and servicing? Look no further than Service My Car. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best Maserati service center.

If you wish to be sure about your car battery condition, head towards the Service My Car. Our experts do not only assist you in assessing your car’s battery, but you also get a professional opinion for battery replacement.

You can visit our website to book a car service or request a car repair quote.

Car Won’t Start Because of a Dead Battery? Here’s How to Jump Start Your Car

On one normal morning, you rush to your vehicle with those quick steps while battling against the clock. But, eventually, once you turn your car keys, just the sound of a dreaded click appears under the hood.

Of course! You have a dead car battery. You can deal with such a situation as Jump Start is here to get your car back on the road.

However, jump starting is a valuable utility to bail you out of an odd situation. But, it requires some knowledge to implement things properly to get the proper result.

What does it mean by jump start your car?

Jump starting is the process of starting a car's engine using an external battery, typically from another vehicle.

It is possible, though, if you have been hearing noises when you turn the key in your car. This is a method to increase the low current in your car's battery to crank up your car’s engine.

Although starting a car with a dead battery is a straightforward process, there are some safety precautions that must always be taken. Also keep in mind that the electrical system needs to be checked if your car's battery runs out frequently.

However, you might try these things to deal with it.

Working Jumper Cables- The word "working" signifies that jumper cables should be rust free and have proper crocodile clips on both ends.

Car with a working battery- Unless your car has special voltage requirements, most vehicles come with a 12.6 V battery. The owner's manuals, however, contain information on the ideal battery voltage. Before choosing a jump start, it would be reasonable to take a look.

If your batteries are different voltages, it could cause charging issues and reduce battery life for you or the other vehicle.

Additional accessories- You need rubber gloves and safety goggles. Moreover, there is a need for rags, paper towels, to clean battery terminals.

Once you assemble all the necessities, these steps take you through the process of jump starting seamlessly.

Bring the car with a charged battery closer to the car with a dead battery.

However, jump start cables possess enough length, but they still have a limit. Make the distance between both cars short enough so that you can easily utilize the jump start cable by connecting them properly.

Make jump start cable connection properly.

You are required to do some things in order to make a proper connection with jump start cables.

• First, remove the keys from both cars.
• Open the hood to determine the location of the batteries.
• Once located, try to identify the terminals of the batteries.
• A positive sign, engraved over the top of the terminal, identifies the positive terminal.
• A negative sign, engraved over the top of the terminal, identifies the negative terminal.
• Now, take the cable and untangle it so that the ends do not come closer to each other.
• Connect the red clamp on one end of the jumper cables to the top of the positive terminal of the dead car battery. Place the matching black clamp on the negative side.
• Next, go to the other end of the jump start cable to connect it to the charged battery terminals. Connect the red clamp to the positive and the black one to the negative terminal respectively.

Jump start your car

Now, you need to take the necessary step of jump starting. However, this requires you take care certain things.

• Check that the car's electronics are turned off and that nothing is connected to the 12 V port.
• After connecting the cables, start the vehicle with the charged battery and let it run for a few minutes.
• Return to the car with the dead battery and turn the key until the engine starts completely. This may take some time as the dead battery draws energy from the other vehicle. If the car starts, you have to remove the jump start cable. This also requires you to follow certain steps.
• Let both the cars in running state while you can start with the car with a dead battery to remove the black clamp cautiously and put it aside on the ground carefully away from the car. Then, remove the red clamp too.
• Next, you need to follow the same steps with the car with a charged battery.
• As all clamps are disconnected, next roll up the jumper cables and put them safe.

In case you find the process a bit technical, you can avail the service of Service My Car to jump start your car.

However, jump start is a remedy to dead battery for once in a while. If you are dealing with dead battery every now and then, your car might need a car battery replacement soon.

Looking for the best Skoda servicing and repair? Look no further than Service My Car. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best Skoda service centre.

If you need any type of car interior cleaning or detailing services, Service My Car provides you free pickup and delivery plus full car servicing at the nearest car detailing Dubai center.

If you wish to be sure about your car battery condition, head towards the Service My Car. Our experts do not only assist you in assessing your car’s battery, but you also get a professional opinion for battery replacement.

You can visit our website to book a car service or request a car repair quote.

There are a sizable number of car owners who are not entirely aware of the important parts inside the engine.However, a small percentage of people read the user manual that comes with a car.

It is advantageous for drivers to have some level of technical knowledge. In today’s world, the technology has become so sophisticated that information is available just in front of our eyes.

However, there should be enough knowledge so that the warning light does not appear alien once it appears on your dashboard.

Engine

However, engines are not something that people do not know. But, there are still some aspects of an engine people should be aware of.

However, there is no point of discussing the inner operation of an engine here. But, an engine does not only power a vehicle, it runs a series of other components. And, these components play important role for a vehicle.

Engine runs the air-conditioning compressor

The engine performs an additional responsibility of running the compressor when it circulates the refrigerant after compressing it.

The compressor clutch engages to receive power from the engine as soon as the air conditioner in your car is turned on.Without a functioning air-conditioning compressor, the summer heat does not seem to be an experience one would prefer.

The engine runs the alternator

No one can dispute the necessity of an alternator for powering accessories and charging batteries. But, it needs an engine to make that rotation that produces the current. Your car will lose power and stop functioning if it fails.

Engine runs power steering pump

Modern vehicles have power steering, which is powered by a pump under the hood. The engine is needed for the pump to function.

However, in order to obtain power from the engine, these components use a variety of belt types. While the timing belt aids in synchronising the engine's own motions.

Inspection of a problem with these components is difficult, though. However, you can examine a timing belt's condition to determine whether a timing belt replacement is necessary.

However, any problem with engine is reflected by a check engine light while you need to for car engine repair earliest possible.

Transmission

The transmission is the next-largest component under the hood of your car after the engine. It sits behind the engine, underneath other components. This component changes the gears in both automatic and manual transmission vehicles.

However, the transmission works as an intermediary for the power transformation from the engine to the wheels.

Cooling system

Next to engine is cooling system, as it is necessary for normal operation of an engine. An engine generates heat during combustion process thus it always needs some sort of cooling to work properly.

A cooling system consists of a range of components responsible for each individual job.

The radiator helps in cooling down the coolant

Since coolant circulates around the engine, it usually gets hot by receiving heat. Here, the radiator does the job of an exchange of heat from coolant in water and air. Once the coolant loses its temperature, it can go for the next round of cooling.

Electric fans blow air through the radiator

Pulling air through the radiator is the principal job of fans. When the engine reaches operating temperature, at least one of the two fans in the majority of vehicles would be turning.

Electric Power Control Unit (EPCU)

An electric power control unit is present in addition to all other mechanical and electrical parts.This unit satisfies all requirements because a car requires electric current to flow throughout the body.

The direct current is converted to alternating current by an inverter on the device.Before sending it to various devices, a low voltage converter converts the high voltage from the battery to low voltage.

All of the vehicle's electric power control systems, including the motor and the braking system are managed by the vehicle control unit.

Engine Control Module (ECM)

Your car does have a computer as it is called the Engine Control Module (ECM). It has other name as the engine control unit (ECU). This unit is in charge of several duties. ECM ensures that your car performs at its best. The majority of the engine bay sensors are monitored by the ECM, which controls the emission control systems and manages the air-to-fuel ratio in your car.

Since an ECU keeps an eye on and controls how your car's engine runs, to manage all of these things, sensors are needed.

Besides these components, there is a list of reservoirs to contain a number of fluids, including coolant, car engine oil, brake fluid, power steering fluid, and windscreen washer fluid reservoir.

This is surely a brief about the things under the hood, so next time you have to sneak under the bonnet;you should be confused with complexity.However, if you keep your vehicle up by opting for scheduled car maintenance, there would not be any need to open the hood.

If you need a top-quality car detailing in Dubai, look no further than Service My Car. Service My Car provides you free pickup and delivery plus full car servicing at the nearest car service center in Dubai.

For this, you can take the help of a car service provider such as Service My Car. Visit our website or app to request a quote for any car repair.

Top Major Benefits of Getting Regular Wheel Alignment

What an incredible machine a car is. Your movement from one place to another is facilitated by mechanical movements. It's truly amazing how the engine transfers power to the wheels.

But what happens if an engine's full power is not transferred to the wheels?

There are some flaws that are noticeable. One of them is the misaligned wheels, which detract from the car's performance while also providing a less than desirable experience.

Most drivers know how much it is necessary to keep an eye on the tire pressure. And, most of us take timely action when it comes to tire pressure. But, do you know about wheel alignment and its benefits? How does it help us in terms of safety and financially?

There should be no ignorance regarding wheel alignment either if you follow your vehicle's maintenance schedules to keep it in top condition. To emphasize this type of maintenance more, you must first fully comprehend what wheel alignment is.

What Do You Understand About Wheel Alignment?

A wheel alignment, as the name suggests, is the configuration of wheels along the axle as well as the road. It means the wheels should have proper adjustment with each other at certain angles while properly attached to an axle.

The wheel adjustments often get disturbed over time due to uneven riding while crossing over the bumps and potholes. A tire alignment requires square adjustments of the wheels with each other so they can move in tandem.

It is accomplished by adjusting a few parts and configuring and positioning the suspension system correctly.

The procedure entails configuring the steering wheel into the center precisely and adjusting all suspension angles that affect tire movement and positioning.

However, this requires a certain level of expertise to deal with the misalignment, and an expert at a reliable service center would be a good choice.

What Are The Real Reasons Behind The Misalignment Of The Wheels?

A common cause of the misalignment is constant striking with something mounted, such as a sideways or a stone along the road. However, small bumps and potholes also contribute enough to disturb the wheel alignment with the axle.

However, such issues are not visible unless they are not experienced sufficiently while driving the vehicle. But how do you actually find out about the wheel misalignment?

• One major sign of a car misalignment is that it starts to drag to either side of the road, where you have to handle the steering with more force to keep it straight.

• Another sign of a wheel misalignment is the feeling of stubborn vibrations even if you are riding on a smooth surface.

• The third and most visible sign of a car's wheel misalignment is uneven tread wear and tear of the front tires. The wear and tear usually appear either inside or outside of the tires.

These are tell-tale signs of a vehicle's misalignment. However, they can hint at some other underlying issues. Therefore, it is always better to opt for the service of an expert at Service My Car.

How Does Wheel Alignment Benefit You?

The wheel alignment benefits you in many ways, whether it is financially or safety wise. Here are a few snippets of the core benefits of a vehicle alignment.

Improvise Fuel Efficiency

A wheel misalignment has an adverse effect on the gas mileage. As misaligned tyres drag through the road instead of steering in a straight direction,it is evident that the engine has to bear more loads to push the vehicle. This reflects well in terms of high fuel efficiency. While a proper alignment allows your vehicle to be less cruel to you in terms of fuel economy.

Increase a Tire's Life

Misalignment is the true enemy of tyres. If you drive your vehicle for an extended period while its wheels are misaligned, the tyres are the first to feel the impact as they start to wear down in many ways. The tyre's sides may receive the wear and tear, or it may be a flatten tread block. Despite the point of wear and tear, you end up opting for a new set of tyres every time.

Better Steering

As it is stated above, a misalignment always results in an uncomfortable experience in terms of steering. You may find yourself holding the steering a bit tight to drive the vehicle straight as compared to normal.

Under normal conditions, you do not need to put extra effort in terms of steering as all wheels tend to drive in a straight line.

Stay Away From Additional Repairs

Simply, a bad alignment that is already deteriorating your vehicle's tyres is not the best condition to drive. Your vehicle may sustain further damage when a such vehicle crosses over the bump or any damaging force.

You end up spending money over the damages to the suspension system while a frequent wheel alignment might save you from burning a hole in your pocket quite easily.

A wheel alignment is not a lengthy process as it needs not more than an hour under normal circumstances. But, if you have not opted for the wheel alignment for a long time, there could be enough damage to deal with and it may take more time.

However, if you sincerely pay attention to the benefits of a wheel alignment, you can notice that it is better to opt for such a service as it pays you back enough in terms of finance by saving on a number of repairs and safety by providing a smooth ride.

Looking for the best Jeep repair and servicing? Look no further than Service My Car. With Service My Car, you get to benefit from our extensive network as your car is likely to be taken to the best Jeep service center.

You possess the right to call for a wheel alignment during the car maintenance. Although, Service My Car is always ready to serve you for all of your automotive needs. You can make use of car service package or ask for a quotation for a car repair on the Service My Car app or website.

How Much Does a Clutch Replacement Cost? Let’s Find Out!

How Much Does a Clutch Replacement Cost?

First things first – it is impossible to completely prevent some component in your car from wearing out. But there are enough ways to make them last longer.

The clutch is the foundation of a manual transmission system. It will eventually wear out naturally, but some foolish driving habits can also impair performance and reduce the clutch's lifespan.

By choosing a few crucial hacks, you can make an effort to keep your clutch in good condition for a long time.Therefore, it is necessary to update yourself with some things that might prove to be helpful in the long run.

Keep Your Clutch Clean

There are many different types of contamination that can affect your clutch's performance. Dirt, mud, grime, and water are just some of the biggest culprits when it comes to clutches. As long as they're kept clean, clutches should last much longer than normal.

A regular maintenance schedule involving the changing of the filter and occasional cleaning with soap and water will keep your clutch running smoothly.

Use Good Quality Grease

Any friction material needs lubrication to work properly. Grease makes sure the parts stay smooth and lubricated as they move back and forth. High-quality lubrication has been specially formulated to provide optimal performance and longevity.

Get Rid Of Bad Components Early

Bad things like oil leaks, worn out clutch plates, and slipping clutches can cause damage to your vehicle. Oil leaks and worn clutch plates aren't always immediately apparent, but they are sure to become problems later down the road.

If you notice any of these issues, get them fixed now while they're still relatively inexpensive. Besides, as a driver, there is enough chances of developing some bad habits. However, you can overcome these habits with introspection here easily.

Keep Your Foot Off Of the Clutch

Unknowingly, many drivers develop this habit of keeping a foot over the clutch pedal. This bad habit contributes substantially to premature wear and tear.

However, changing a habit is tough, but it is fruitful. The clutch assembly goes through the unnecessary strain and wear if your left foot is constantly resting on the clutch.

A clutch pedal should be fully depressed or leave free. Anything in between at any time will unquestionably reduce its lifespan.

Learn To Use the Clutch Pedal Smoothly

When it comes to applying force to a clutch pedal, don't use so much pressure that your foot starts throbbing. Over tightening your clutch will wear it out faster than normal.

There will be need of pressing the clutch pedal now and then. And, you have to be conscious about using a clutch properly.

However, it is a skill and requires time to become comfortable. People often develop this habit during their initial days of driving.

Avoid Using Your Clutch Too Much While Idling On Uphill

A good habit is to use the parking brake or hand brake while stuck on an inclination rather than keeping your vehicle in gear and using your clutch engagement. The clutch and gear box will be put under a lot of stress if you simply keep the clutch depressed and roll backward while you wait for first gear to engage.

If you live in an area where these instances occur frequently, it is quite possible that you will end up looking for clutch replacement near me well before the speculated time.

Avoid Using Brake and Clutch Simultaneously For an Intended Slow Down

When slowing down, people often get into the habit of simultaneously pressing the clutch and brake.

Additionally, it is a secret fact that releasing the clutch early while applying the brakes results in a loss of braking power.The clutch should only be engaged when shifting gears if you want to slow down.

These suggestions should be quite helpful for your car’s clutch. But, you will have to go for a clutch replacement at some point in the future. Therefore, it is obvious that you are concerned about the clutch replacement cost.

How Much Is a Clutch Replacement in the UK?

For a clutch replacement cost UK type of deal, you can request a FREE and INSTANT quote at Service My Car. We have the best UK workshop and the cheapest UK car parts in our expansive automotive maintenance network.

How Much Is a Clutch Replacement?

To find out the clutch replacement cost, simply request a quote on the Service My Car website or app. Our extensive car parts network will ensure you get the best parts at highly competitive rates!

You can avail the best clutch replacement UK has to offer at Service My Car.A clutch should not be taken for granted because it is a necessary accessory. Timely action, whether it is maintenance or a part replacement, proves to be very beneficial in the long run.

Preventive measures and some behavioural adjustments are beneficial for a clutch and may prevent you from needing a clutch replacement too soon.

Service My Car should be your first choice if you require professional help with clutch maintenance.

Seals and gaskets are very basic but essential parts of a machine. A car cannot be assumed to exist without gaskets and seals because of their critical role in lubricant and fluid protection.

From front to back, there are various gaskets and seals present. Each of them has a special function, and they act as the guardians of various liquid restrictions invisibly.

However, the most critical gasket around the engine is the head gasket. It is worthwhile to gain knowledge about the head gasket while a worn gasket might be responsible for substantial damage under the hood.

What Is A Head Gasket?

To comprehend the head gasket function in engine, it is necessary to understand the basic structure of an engine. It can divide into two parts where lower part is cylinder block while upper one is head.

While the head is in charge of having the valves, spark plugs, camshaft, etc., the cylinder block houses the cylinder and the pistons. Both elements must be mutually exclusive in order to work properly together.

It implies that they require some sort of cushion between them so that coolant or engine oil cannot seep inside the cylinder.A head gasket fulfils the requirement for a cushion while restricting the coolant as well as engine oil from leaking into the cylinders.

On the other hand, it does not only regulate the coolant and engine oil, but it directs the harmful gases to the exhaust system rather than leaking under the hood.If there is engine involved, you can understand the value of a head gasket. In case it goes blown, there are enough chances of catastrophic engine damage.

However, the signs of a blown head gasket are fairly simple to recognise, and it needs to be fixed right away to avoid further damage. You can learn more about the head gasket in this article, including how to recognise when it fails.

Heat is a head gasket's main threat. While the engine is running, it is challenging to remove the heat. To make things cooler, however, there is coolant. When coolant is scarce, things start to go wrong. A system leak of some kind could cause a coolant to go short.

An engine cannot stop producing heat once there is not enough cooling. In addition, some gasket materials have lesser life than others. Some metal gaskets have a higher rate of thermal expansion, which causes premature wear and tear.

On the other hand, a modification to the cylinder head frequently affects the gasket's ability to provide a reliable seal. The deterioration of the gaskets is also significantly influenced by age. After some time, they start to lose capacity and quality.

Keeping the importance of engine process in mind, a gasket is not something that you should neglect. A deteriorated gasket cannot maintain the pressure that is probably highlighted in lack of engine power.

Additionally, oil and coolant passageways might start to leak in unintended places. Engine overheating may result from coolant entering the combustion chambers, which mixes and dilutes the engine oil and reduces the cooling capacity of the cooling system.

How Do You Find Out About A Deteriorated Head Gasket?

A vehicle needs three essential fluids for its operations, fuel, engine oil and coolant. However, fuel is allowed into the combustion chamber while others are not. As already discussed, a head gasket sealer offers this facility. A blown gasket lacks in its capacity of resistance. And, if there is any infiltration inside the combustion chamber, there would be these consequences. 1. Engine usually starts to overheat due to lack of coolant and infiltration of hydrocarbon inside cooling system 1. Densely coloured smoke at exhaust is quite common, it can be while, blue or grey in nature. 1. A malfunctioning combustion chamber cannot perform internal combustion properly. Therefore, you mind end up with lack of power. 1. You find certain discoloration of engine oil due the coolant mixing.

These tell-tale signs offer enough hint if there is any head gasket issue. However, there should be no hesitation in opting for an inspection at a reliable service centre.

How Much To Repair A Head Gasket?

If you have any concern about what sort of head gasket repair cost UK has, look no further than Service My Car.You can get a free and instant quote for your head gasket repair on the Service My Car website or app.

All your head gasket repair cost fears will be assuaged as we guarantee competitive repair prices by offering the UK’s best car repair quotes. Service My Car is your trusted car maintenance solution. Request a head gasket repair quote today.

How Long Do Brake Pads Last? Let’s Find Out from Service Experts

Pressing an accelerator makes you thrilled while brakes keep you safe. Apart from the regular stop and go, the brakes are crucial when driving through sudden intersections or on slippery roads.

This should turn our focus on the maintenance of such a critical component such as brakes. However, you should know all the nitty-gritty of a vehicle’s brake system.

Your car's braking system is intricate but surprisingly easy to maintain. To make sure all parts are in good condition, it is crucial that you examine each component and perform any necessary repairs.

However, you might have a lot of queries in mind about the braking system. A compilation of some essential questions is surely helping you to keep abreast while maintaining a vehicle in top shape.

What Are The Important Parts Of A Braking System?

In the case of disc brakes, a system consists of three major parts: brake pad, brake rotor, and brake clipper.

Brake Pads- A component that presses against the rotors. It is responsible for stopping the wheels. Brake Rotors - A disc shaped component that is responsible for providing the platform against the brake pads.

Brake Clipper - It holds the movement of the brake pads against the rotors.

What Are The Best Ways To Maintain The Longevity Of The Brake System?

The above-mentioned components play a critical role while applying the brakes. Therefore, it becomes essential to understand some ways to take good care of these parts of the braking system.

Adopt Good Driving Habits to Keep the Brake Pads Longer Than Usual

Your driving habits might be the major saviour of the brake pads. Usually, drivers develop the habit of applying the brakes aggressively. However, this does not impact the brake pads at lower speeds, but higher speeds take a toll on the brake pads.

During high speed braking, the disc and brake pads contact to dissipate the energy. The energy turns into heat that causes some sort of burn out on the brake pads.

However, if you improve your driving habits, there are enough chances that the brake pads may last a few more years than usual. It requires you to slow down a bit first while driving at a high speed while applying the proper brakes to stop a vehicle.

You can reduce the strain on your brake pads by letting off the accelerator as soon as you see a stoppage of any kind such as red light, cross, etc.

Besides, it is wise to remove any unnecessary weight from your car before you leave so that you can coast to a stop easily. However, give yourself plenty of following distance from the vehicle in front of you.

Inspect the Brake Pads and Replace Them If Needed

Just like other parts, the brake pads are also prone to wear and tear. However, a timely inspection is necessary to stay away from unnecessary incidents.

You can opt for a brake pads and discs inspection by yourself or you may take the help of a professional. However, there are some signs of worn brake pads.

A basic sign of a worn brake pad is vibration when a brake pedal is pressed. You might hear some squealing noise while pressing the brake pedal.

A car takes more time to come to a stop after pressing the brake. However, you can do a visual inspection and there are enough chances that brake pads will come out worn.

How Long Do Brake Pads Last?

On average, a set of brake pads remains in good condition for 80,000km. However, it is wise to keep an eye on the brake pads once a vehicle achieves a mileage mark of 50,000km.

As it is already discussed, brake discs and pads conditions depend on individual driving habits.

In the case of aggressive driving, the brake pads get worn prematurely, while conscious driving fuels all the possibilities of the longevity of brake pads.

And if you take care of the load your vehicle carries, the brake pads do not get enough pressure and wear slower as compared to the heavy loads most of the time.

How Much To Replace Brake Pads In UK?

Brake pads do not require a fortune but still they need enough money to spend. To find out how much brake pads cost, simply request a quote at Service My Car. You can get specific quotations to help you with replacing front brake pads, or alternatively, replacing rear brake pads.

How Much Does It Cost To Replace Brake Pads And Discs?

Most cars use disc brakes at the front wheel only, while the rear wheels contain drum brakes. In this case, an owner would need a pair of discs. However, there would be extra service charges.

At some point, a vehicle's components need to be replaced. Nevertheless, maintaining such components to lengthen their lifespan is not a problem because it results in significant financial savings.

However, you can use a professional's assistance by choosing quality car maintenance to reduce the premature wear and tear. Service My Car undoubtedly contributes to this cause by providing affordable auto care. On our website or app, you can quickly request a quote for a car service.